About Us

Blog!

Home

CSE Head Office :
01628 529448

CSE Southampton :
023 8063 3055

CSE Cables :
01628 850024

ABB Drives	Motor Control Gear	Circuit Protection	Switch Gear	Special Offers	Cable	Industrial Controls
Danfoss Drives	Cable Management	Control Products	Tools & Accessories	Power Distribution	Enclosures	Buy On-Line

Click to send us a

Cat 5e FTP Solid Steel Wire Armoured Data Cable

1 : Diameter of conductor : 24AWG

2 : Insulation : Pe, OD = <1mm

3 : Cable assembly : pair
Number of pairs : 4

4 : Synthetic water repellent tape

5 : Shield : Aluminium / polyester tape and continuity wire

6 : Sheath material : LSZH, PVC or PE

Electrical Characteristics

Conductor resistance at 20^oC (Max)	98.6 Ohm / KM	CSE holds stock of a wide range of cables - Contact Corrina, our cable expert at Click for printer friendly version
Dielectric strength at 50Hz	1 kV / 1 min
Insulation resistance (min.)	5000 MOhm / km
Capacitance unbalance - pair to ground (max)	800 pF / 500m
Transfer impedance (Zt) at 10 MHz (max)	100 mOhm / m
Velocity (nom.)	78%
Characteristics impedance (Zc) from 1 to 100Mhz	100 Ohm

Environmental Characteristics

Transport and storage temperature :	0 + 50^oC
Operating Temperature	-20 + 60^oC
Fire resistance	IEC 332-1 NFC32070 2.1 (Category C2)

Mechanical Characteristics

No. of Pairs	Type of Jacket	Colour of Jacket	Conductor OD (mm)	Insulation OD (mm)	Cable OD (mm) nominal	Cable weight (kg / km)	Min laying Bending radius (mm)	Max. pullng tensions (N)
4 pair	LSZH	Ivory	0.51	0.98	5.90	38	50	80
4 pair	PVC	Grey	0.51	0.98	5.90	37	50	80
4 pair	PE	Black	0.51	0.98	5.90	40	50	80

Applications : IEEE 802.3; IEEE 802.5; FDDI; ATM; RNIS

Cable Standards : IEC 61156-5; EN 50288-1 a-6

Cabling system standards : IS 11801 ed. 2; EN 50173; EIA / TIA 568

Cabling system installation standards : EN 50174

CSE Industrial Electrical Distributors
Email : - UK enquiries- 01628 850024
Tel : International enquiries +44 (0)1628 850024, Fax - +44 (0)1628 648068