About Us  Contact Us  Blog!  Home
CSE Industrial Electrical Distributors CSE Head Office
CSE Head Office :
01628 529448
CSE Southampton
CSE Southampton :
023 8063 3055
CSE Cables
CSE Cables :
01628 850024
ABB Drives Motor Control Gear Circuit Protection Switch Gear Special Offers Cable Industrial Controls
Danfoss Drives Cable Management Control Gear Tools & Accessories Power Distribution Enclosures Buy On-Line

Click to email Ray -  CSE's Danfoss consultant or call
023 8063 3055

Click to send us a

Click for printer friendly version

 
CSE Unit 4 Bourne End
Danfoss EV210B Solenoid Valve

Danfoss EV210B 1.5 - 25B Solenoid Valve

2/2 Way direct operated valve

  • Robust construction
  • For neutral liquids and gases such as water, oil and compressed air
  • Coil enclosure up to IP67
  • WRc approved versions
  • Thread connections G1/8" up to G1"
  • Ambient temperature up to 80oC
  • Flow range for water up to 2.1m3/h
  • Click for the Danfoss EV210B data sheet.
  • Click to buy the Danfoss EV210B on-line now or call Ray - CSE's Danfoss Consultant on 023 8063 3055.

Technical Data

 
Pressure Range 0 to 30 bar
Ambient temperature: Max 80oC (depending on coil type - call for data for coil selected)
Media temperature: Valves with WRc approval: -30oC to 100oC. Others: -10o to +90oC
Materials: Valve body : Brass
  O rings / valve plate : NBR or EPDM
Except : 032U1230 - FKM
             032U1229 - O ring NBR, valve plate PTFE
Code No.
(without coil)
End Connection Kv Value Orifice (mm) Seal* Material Type designation Differential pressure (bar based on coil BB max.
Main type Specification min. 10 W a.c. 18 W d.c.  
032U5704 G 1/8 0.15 2.0 FKM EV210B2.0B G18FNC000 0 30.0 30.0 Buy now!
032U5710 G 1/4 0.3 3.0 FKM EV210B3.0B G14FNC000 0 20.0 13.0 Buy now!
032U3601 G 1/4 0.55 4.5 FKM EV210B4.5B G14FNC000 0 10.0 4.5 Buy now!
032U3608 G 3/8 0.70 6.0 FKM EV210B6.0B G38FNC000 0 4.0 2.0 Buy now!
032U3633 G 1/8 0.15 2.0 FKM EV210B2.0B G18FNO000 0 12 12 Buy now!
032U3639 G 1/4 0.30 3.0 FKM EV210B3.0B G14FNO000 0 5 5 Buy now!

*FKM seals for general use on oil, air or water - EPDM seals for use on water or glycol
NC - Normally closed versions, NO - normally open versions (in specification code)

E & OE

 
     
 

CSE Industrial Electrical Distributors; Email : - Tel:01628 529448; Fax:01628 810093;
Cable Enquiries Tel
: 01628 850024; Email :

Tel : International enquiries +44 (0)1628 529448, International Fax - +44 (0)1628 810093 , Tel : South UK - 023 8063 3055