How to use solenoid valves

FREE - Danfoss how to use solenoid valves booklet - click to request this handy pocket sized guide.


Danfoss KP Thermostat Solenoid Valve
Danfoss KP Thermostat Solenoid Valve

Danfoss Type KPThermostat

KP thermostats are single-pole, double-throw (SPDT) temperature operated electric switches.
KP is used for regulation, but can also be seen in safety monitoring systems. It is here that the electronic mechanism shows its superiority.

KP thermostats are available with vapour charge or with adsorption charge.

Click for a Danfoss KP Thermostat Technical Brochure. For more information call Ray Hargreaves and the team at our Southampton office.

Technical Data

Ambient temperature : -40oC to 65oC (for short periods up to 80oC)
Enclosure : IP30; with top cover or protection cap: IP44
Electrical connection : Cable entry for diameters 6 to 14mm
Contact system : SPDT
Contact load : AC-1 Ohmic : 16A, 440V
  AC-3 (motor) : 16A, 440V
  AC-14/15 (coil / transformer): 10A, 440V
  DC-13/14: 12W, 220V
Code No. Setting range Differential Max. Sensor Temperature
(oC)
Capilliary tube length (m) Type  
060L1126 50 to 100 5 to 15 150 2 KP79 Buy now
060L1125 80 to 150 7 to 20 200 2 KP81 Buy now
060L1183 80 to 150 7 to 20 200 3 KP81 Buy now